Private label Smoking Cessation Transdermal Patch

AmWiner raphegeneRics private label Nicotine smoking cessation transdermal patches. A pharmaceutical manufacturing plant with a yearly output of 3.7M packs per step using clinical research formulation. FDA-approved for Amazon, HEB, and Kroger as medical device transdermal drug delivery products. The preferred contract manufacturing pharmaceutical company for Perrigo and Johnson & Johnson specializes in transdermal drug delivery, minoxidil hair loss pills, oral and topical, and omeprazole gastric ulcer treatment. AmWiner Nicotine transdermal patch delivery system was the pioneer device at the clinical research conducted by A-Corp Palo Alto, California, University of California, San Francisco General Hospital, San Francisco, California and Marion Merrell Dow Inc., Kansas City, Missouri in the USA, and has since become the contract manufacturer of choice for A-Corp for Nicotine transdermal patches step 1 to 3. AmWiner formula has clinical research backup available upon contract.

AmWiner is a Generic drug manufacturer established in 2005, supplying over 150 generics over the counter to stores nationwide. AmWiner uses clinical trial formulas for every generic drug manufactured and provides clinical documents and finished product quality control test reports for each product. FDA cleared for 105 manufactured generic OTCs and two biologics for psoriasis treatment. AmWiner became the smoking cessation patch manufacturer of choice for drug stores in Canada in 2022, manufacturing each pack of step 1 through step 3 smoking cessation nicotine transdermal patches at $5.98.
AmWiner prepared a nicotine-loaded matrix by dissolving a polyether-type polyurethane in an appropriate solvent, adding liquid nicotine, and homogenizing the mixture. The matrix mixture is then cast onto the backing material using polymer casting techniques. After curing, a thin adhesive film is cast onto the matrix, or double-sided medical adhesive tape is attached. The release liner covers the adhesive, and patches of the desired size are cut out by punching. The finished patches are sealed into foil pouches and stored until needed.

Keywords: Private label nicotine smoking cessation transdermal patch, Nicoderm smoking cessation patch, Habitrol smoking cessation patch.

The patches of the present invention are preferably designed to replace one day's nicotine intake from cigarettes. The nicotine the patch releases during use is approximately 30 to 36 mg, with 68% to 76% of the released amount absorbed trans-dermally.

AmWiner specializes in Nicotine transdermal patches and oral solid dosage pills, both prescription and over-the-counter. They provide clinical studies for their smoking cessation transdermal patch formula, clinical research supporting step 1 smoking aid transdermal patches, and finished product testing validated by a third-party testing center for clinical trials.
Call 469-428-5508 for more details or send email to compounding@amwiner.com

Taste Masking Technology: 

AmWiner Raphe Pharma has expertise in developing and making taste-masked products using fluid bed coating, ion exchange, and other technologies. We have successfully created a taste-masking formula to mask exceedingly unpleasant flavors at less than 40-micron particle sizes.

 Tablet Coated Formulations

 AmWiner Raphe Pharma's formulations are customized to each unique situation. We identify the optimal coating material to establish the optimal system for each project. Our highly trained technicians evaluate all formulation options during this phase to create the final product. The system is then designed to fulfill the desired function and coating material restrictions. The form or variant of the core material is evaluated, along with its particle size, cost, and production requirements.

 Tablet Pressing & Capsule Filling

 Powder can be pressed into various tablet sizes and shapes using a tooling press. Our multiple blending operation styles allow drug distribution throughout the tablet. We can handle any project size, from research to commercial manufacturing, with our 3-station tableting machines.

 Modified Release Technology

 The controlled release mechanism is achieved via a matrix or core-shell structure that offers obstacles to the drug's release. Controlled release of active ingredients is achieved through a matrix or core-shell structure in which the matrix or shell functions as an obstacle. The matrix's porosity, solubility, or erosion property is used to slowly release the active ingredient through the outer coating at a defined rate.

 Encapsulation Fluid Bed Coating

 Since its establishment in 2005, AmWiner Raphe Pharmaceutique has been a leader in fluid bed coating technology. It encapsulates tiny particles in a fluidized bed by creating a cyclic airflow in a differential airflow. Our process differs from other coating procedures in that the nozzle is situated at the bottom of the fluidized bed of particles. When a substance is atomized and sprayed throughout the chamber, a cyclic air stream moves the bed of particles upward as it is coated to form a core-shell composition.

 Process Validation

 There's no product or market in which quality is not essential. A final validation report is prepared once all the required work has been completed, satisfactory results have been achieved, and the procedure is validated for mass production. Raphe has the workforce and resources to accomplish every phase of process validation, from developing a process validation protocol to compiling the final process validation report. Virtually every product in any market and industry considers quality to be necessary.

 When you have a special tablet to bring to the market for commercial distribution, contact us to discuss other technologies available at 469-428-5508

One size does not fit all in dermatology. Hair loss has so many pathogenesis and everyone should be treated based on the cause of his hair loss. Administrating minoxidil to every hair loss not only creates resistance to testosterone immunostimulatory, but it also creates more hair loss, especially in women. This is why AmWiner developed different types of customized OTC hair loss treatments to target each form of hair loss so that no matter what the cause may be, you will always find a solution. DHT blockers alone have never been the definitive treatment for hair loss. The primary issue of UV-free radical oxidation of the follicular proteins has been under-addressed in most topical treatments. Just as we would protect our skin from UV-sun damage by free radicals, the same way we should protect our scalp from UV ray damage. Pyrithione Zinc offers multiple benefits for treating the inflammatory scalp caused by sun damage and bacteria-fungal infection, and the Zinc component screens the scalp from UV damage like Zinc Oxide used in sunscreens.

When sourcing hair loss treatment products, look for natural product formulations free from petroleum chemicals that deactivate the follicular stem cells, chemical irritants, and synthetic fragrance-free formulas. PG is a good moisturizer and emollient, but when it comes to hair loss, we advise you to use or look for products with a natural moisturizing and conditioning agent like Cocoamidobetaine, Coconut glycerin, and propanediol instead of petroleum chemicals. Using topical solutions containing 0.1% ten to twenty minutes before sun-hit is recommended to help prevent scalp damage, the same way as applying sunscreen twenty minutes before sun exposure is recommended to help prevent skin damage. If you have used DHT blockers for six months and the hair did not grow back, consider treating the scalp condition of follicular inflammation, infection, and UV damage using Pyrithione Zinc herbal and polyphenol extract products. Anti-inflammatories such as Triamcinolone and fluocinolone are very helpful, but whichever pathway you see best, shielding your scalp from sun damage to the follicles, should be the topmost priority.

Minoxidil alone is not a definitive treatment for hair loss because when discontinued, the hair loss continues. This would mean lifetime dependence on treatment to keep the hair hence AmWiner product formulas were combined with other active ingredients that treat other causes of hair loss, present in 70% of women, such as inflammatory scalp and Treatment for Cicatricial alopecia, follicular degeneration syndrome, and clogged pores. The goal is to keep patients healthier and off medication in the shortest possible time, by birthing a pathway of broad-spectrum hair loss treatment that would cover all likely causes of hair loss.

AmWiner manufactures other pharmaceutical OTC products for private label or customized, such as Nicotine Smoking Cessation Patches, also called Nicotine Replacement Therapy (NRT), which includes the branded business and a private label proposition. Both portfolios have a diverse range of products, including patches and lozenges, of different strengths, which aim to help consumers quit their smoking addiction for good. The smoking Cessation patch utilizes a unique Smart Control Technology, which allows for a continuous release of nicotine throughout 24 hours.

Vaginal Yeast Infection, Private label products, are available under your brand with a low minimum quantity or as a customized formula.  All-in-One Vaginal Care for Women, Yeast Infection Treatment, Relieves Pain, Inflammation & Redness, Eliminates Excess Water, Re-Balance Vaginal Flora, Soothing Cooling & Calming, with Anti-Itch Odor Blocking Formula. Maximum strength one-day dosage of 1200mg, extra strength custom two-day dosage of 1000 mg, and regular three-day 600 mg treatments are available upon request, with 5% or 2% 30 grams external cream. Business credits are available. The ingredients and raw materials are organic sourced from suppliers that respect the environment and biodiversity.

Private-label Arthritis Pain relief cream Sodium Diclofenac 1% with 5% Lidocaine External Analgesic, a non-steroidal anti-inflammatory medicine for arthritis with a proven safety profile for arthritis pain, is now available over the counter, formerly a prescription product, it has been trusted by patients and doctors in the U.S. for 10+ years and is non-greasy. An alternative to pills, arthritis pain gel, treats arthritis pain by targeting pain directly at the source to deliver clinically proven nonsteroidal anti-inflammatory medicine for powerful arthritis pain relief with a proven safety profile. Clinically proven to relieve joint pain, reduce stiffness, and improve mobility—a non-greasy and clean scent. Lidocaine and NSAIDs are the key ingredients in this formulation. They work together to provide fast-acting and long-lasting relief from inflammation while minimizing the side effects associated with NSAIDs.

Prescription Strength Tretinoin 0.1% with 5% Hydroquinone private label for healthcare providers for the treatment of acne, melasma, and correct hyperpigmentation in all skin types. Amwiner provides everything a clinical practice needs to offer patients customized care, delivering targeted results and repeat purchases through tailored regimens in preventative and maintenance skin and hair care. The AmWiner system includes over 150 customized products and high-end non-monograph skincare products under your professional brand.

Cold & Flu Cough Syrup Decongestants is a private label for adults and kids. AmWiner manufactures multi-action over-the-counter cold flu syrup for severe cough cold flu decongestant with ibuprofen 250mg and acetaminophen 500mg. Alleviating intra-sinus inflammation is critical to quick recovery from cold and flu. Mint flavor with 12 hours of cooling soothing comfort. Super great taste. No High-Fructose corn syrup. Ibuprofen, as a traditional NSAID, decreases the synthesis of pain- and inflammation, while Acetaminophen, a non-NSAID analgesic, exerts its effects on inhibiting and activating central serotonergic pathways. Working together, the two active ingredients provide 12 hours of harsh pain relief, superior to ibuprofen 250 mg and acetaminophen 650 mg alone. The only COLD FLU syrup that fights pain using two different approaches to maximize efficacy while requiring lower maximum daily doses of each medicine. Only 20 ml per serving is needed to achieve full relief compared to 30 ml of traditional cold flu syrup.  It provides faster relief from cold flu symptoms, and patients can return to work and health faster. Formulated to give patients the benefit of achieving relief by alleviating the inflammation of the bronchial cavity, nostrils, and sinuses, which is absent from the current products in the market today.

AMWINER UNIQUE PRODUCT FEATURES

 The hair care products are made from naturally sourced ingredients, formulated to address all causes of hair loss from radiation toxins, environmental pollution, UVA-UVB sun rays, seborrheic dermatitis, fungal and bacteria, and more importantly, DHT hormone inhibition by incorporating active pharmacological ingredients, vitamins, and minerals known to grow and prevent hair loss. It works synergistically with minoxidil natural at maximum approved strength to inhibit the hair loss culprit hormones without further hair loss upon discontinuation.

Skincare products are absolute therapy for acne, zits, unwanted pigmentations, and saggy skin and correct fine lines with a specific focus on each skin type and age bracket. The products preserve the quality of the soil, water, and air and avoid pollution, deforestation, and depletion of human and natural resources. They are sustainable, have a low carbon footprint, and are clean beauty skincare and personal care products. Manufactured in FDA FDA-registered and inspected facility compliant with cGMP protocols by professional biochemists. All products are WERCS-OSHA-certified and compliant with California Prop-65, with a 100% guarantee to deliver promises with the highest purity and efficacy. The packaging materials are locally manufactured from recycled materials and are recyclable in cooperation with local communities, respecting each lifestyle.

All products come with a 100% Lifetime Warranty. We replace all third-party product returns at no additional cost to distributors, recall all unsold products 90 days before their expiration dates, and replace them at no extra cost to our distributors. You can rest assured that you will never lose a dime selling or distributing any product they manufacture.

Drug store buyers turn to Amwiner for these products: 1: Allergy Nasal Decongestant Spray Oxymetazoline hydrochloride (0.05%) nasal sprays. Maximum strength relief from mild to moderate asthma allergy congestion and inflammation attacks. Formulated with a base distillate of Yerba Santa, Mullein, and elecampane root extracts, a natural anti-inflammatory agent for longer-duration relief and hyaluronic acid for extra moisturizing. No drip severe congestion maximum strength 12-hour nasal congestion relief spray provides fast, powerful, medicated relief of asthma nasal congestion, colds, or allergies. Formulated to work instantly, allowing more straightforward nose breathing without unpleasant wheezing.

2: Mometasone furoate monohydrate (glucocorticoid) 50 mcg Emergency Airway Decongestant The mometasone furoate 50 mcg spray offers the same prescription strength relief over the counter for 24 hours. Instant relief of multiple allergy symptoms such as nasal congestion, runny nose, sneezing, and itchy nose. This odor-free mist spray is the

way to deliver non-drowsy allergy medicine directly to the site of congestion. A trusted active ingredient for all day and night, relief of seasonal allergy symptoms. It is not recommended for use in children, and long-term use is not encouraged for the risk of glaucoma and cataracts.

3: Phenylephrine Hcl 1.0% Non-Drowsy Fast Acting decongestants and Ephedrine Sulfate 25mg Bronchodilator Relief of Mild intermittent Asthma Symptoms Caplets

 4: Minoxidil hair loss treatment tablets, finasteride tablets, spironolactone, and over-the-counter self-care are used for hair loss. The company is the third Pfizer and Perrigo qualified FDA facility vendor, manufacturing generic prescription tablets, capsules, and liquid oral dosage medications.

 AmWiner offers customized Hair Loss treatment.

 Clascoterone and CB-03-01 Formula for Psoriasis Hair Loss, Frontal Fibrosing Alopecia, Cicatricial Alopecia, Inflammatory Scalp Disorder, Folliculitis Decalvan, Scalp Nodules and Papules, Bacterial Folliculitis, Sycosis Barbae, Scarring Alopecia, And Scalp Dermatitis. DALOSIRVAT, SM04554, and SETIPIPRANT formula, the absolute for hair loss caused by telogen effluvium or certain diseases like thyroid insufficiency, thalassemia, and HIV. Hair loss from side effects of medications, birth control pills, behaviors like trichotillomania, nutritional deficiency, traction alopecia, and rapid weight loss. The Next Big Thing in Hair Loss Restoration with RU58841 and Dutasteride. The Product of choice for hair loss induced by radiation therapy, progesterone deficiency, prolonged hospital stay hair loss, stress induces hair loss, non-genetic hair loss, hair loss not associated with any known causes, hair loss from autoimmune diseases and syndromes, emotional distress, exposure to toxins, Lichen planopilaris, viral infections such as herpes zoster and herpes simplex, appendage tumors, patchy, circular, or oval hair loss with distinct edges hair loss in men and women. The Next Generation Hair Loss Treatment Bimatoprost & Minoxidil Sulphate 5% Solution. Bimatoprost, a prostaglandin F2-analog, has proved a great success in treating eyelash and scalp alopecia. Bimatoprost is a medication that is effective in the treatment of glaucoma and other conditions of the eye. The FDA also approves it for treating hypotrichosis, sparse or thinning eyelashes. In recent years, bimatoprost has been used off-label for hair growth. It helps with follicular syndrome, folliculitis, cicatricial alopecia in women, chemical and environmental pollution hair loss, pregnancy-induced hair loss, UV radical hair loss treatment, and for use in men over 50 who do not respond to traditional minoxidil solutions or experienced hair loss for over seven years.

 For more information, email: sales@amwiner.com or Call: 1-469-428-5508

The Bag-on-valve (BOV) technology system is a hygienic and reliable form of packaging technology with several advantages over conventional aerosol canister spray of foam packaging. The product constituents are kept separate from the base ingredients, ensuring the product’s purity. This technology also protects the aerosol or aerofoam from oxidation, heat, and secondary pollution. BOV’s introduction to aerosol canister packaging is a progressive innovation that outdoes its predecessors on arguably all fronts. As such, it suffices to say that it is here to stay, and soon, it will render conventional aerosol canisters obsolete.

One of the primary benefits of BOV is its safety and environmental advantages. This is because no flammable propellants are required; instead, environmentally friendly gases or the base product ingredients are used. The aluminum bags ensure that the formulation is hermetically sealed. This prevents contamination and oxidation of the active ingredients to the last pump, which also contributes to the durability of the products without preservatives.

In traditional canister aerosol, the product is mixed with propellant and preservatives, rendering it not pure enough to enhance the products` quality. Excessive preservatives in hair care products, used to prolong shelf life, are one of the culprits contributing to hair loss in men and women. Additionally, a poor sealing mechanism can lead to product contamination by bacteria and other gases, potentially reducing its overall shelf life. In a traditional aerosol canister, you can only use about 95% of the product stored in the canister. Still, with BOV aero foam technology, you can use the entire contents, leaving no room for waste or negative environmental impact. BOV allows complete product emptying, leaving no product in the container.

Sealing performance: When it comes to BOV, we utilize a multi-level protective system comprising a tin-plated steel can (or aluminum), aerosol valve components, and four-layer vacuum pouches that separate the active ingredients from the rest of the product's ingredients. On the other hand, conventional aerosol canisters do not have the best sealing performance, nor do they have a bag to safeguard the product’s integrity.

Hygienically clean: Separated and Yet Together. The primary difference between conventional aerosol technology and the BOV system is that, in the traditional variant, the product and propellant are combined in the can, with no separation. With the BOV technology, the active ingredients and the product base are separated in the can. The active ingredient is contained in a separate flexible bag, which is connected to the valve, and the compressed gas and other base ingredients is in the remaining space between the bag and the side of the can. When the actuator nozzle is pressed, the pure product is dispensed, though separately, onto your palm.

BOV system as private label optional packaging to distributors of Minoxidil hair loss treatment foam with a minimum of 50,000 units per order. A 40% deposit is required, with a 60% balance spread over 12 months. It is not only an excellent dispensing system, but a sustainable packaging process that also helps reduce our ecological footprint, improves the product efficacy and shelf life, and with no entry of environmental oxygen or nitrogen, the oxidative process of formula breakdown is eliminated resulting in a more potent product with longer duration shelve life.

US-Bachemistry PEPTIDE SYNTHESIS TECHNOLOGY 

US-Bachemistry peptide manufacturing laboratory announced their migration into Bachemistry Corporation as an approved vendor for Liraglutide in 2025 for generic peptides in research and investigational clinical trial phases. Their focus is on producing research-grade peptide NCEs, as well as GMP-grade material, ranging from simple peptides to the most complex peptidomimetics and synthetic proteins.  Making commercial NCEs a success, US-Bachemistry partnered with Bachem, the world's leading peptide manufacturer, to develop high-quality new chemical entities.

Combining innovative peptide science and flexible GMP manufacturing capabilities. US-Bachemistry offers GMP-compliant synthesis services for peptide NCEs and commercial peptides, and provides optimized and scaled-up drug substance. Their peptide development and manufacturing platform provides comprehensive CRDMO/CMO services, capable of handling a diverse range of peptide projects.

US-Bachemistry's ongoing research on the bioavailability of orally administered peptides compared to the subcutaneous route shows that 1mg of peptide administered sublingually daily is equivalent to 5mg administered subcutaneously weekly. The research aims to suggest alternative methods for alleviating injection site redness, pain, swelling, and total body chills, as well as muscular pain, triggered by subcutaneous administration in approximately 20% of the population.

Their sublingual peptide lozenges come in various forms, shapes, and sizes, ranging from mini capsules to tabs, each enhanced with 3mg Sodium salcaprozate (SNAC) to improve absorption. Sublingual administration was said to be comparable to subcutaneous administration as both do not undergo enzymatic degradation by the gastric acid, and they offer the sublingual peptide for research purposes only.

US-Bachemistry is an FDA-registered API Peptide and monograph drug facility offering in-house Solid-Phase Peptide Synthesis utilizing cutting-edge peptide synthesizers, analytical-preparatory HPLC, and PEP Easy Clean purification technology for the highest purity. Provides pre-clinical investors with peptides for investigational drug trials. All peptides are Bachem-retested for purity, sequencing, amino acid identification, and mapping.

US-Bachemistry's mission as a peptide pharmacologist is to discover modifications in the nucleotide structure that will effectively modify the human genome, thereby elongating telomeres to enhance longevity and increase the average lifespan of humans to 140 years, while maintaining the youthful internal organs that sustain life.

Growing a luscious beard is a dream for many men. It not only enhances their appearance but also boosts their confidence. However, not everyone is blessed with fast-growing facial hair. This is where Beard Mens Facial Hair Growth & Conditioning Gel comes into play. This revolutionary product is designed to stimulate facial hair growth and condition the beard, giving you the luscious beard you've always desired.

The secret behind the effectiveness of Beard Mens Facial Hair Growth & Conditioning Gel lies in its unique formula. This gel is enriched with a blend of powerful ingredients that work together to promote hair growth and nourish the beard. One of the key ingredients is biotin, which is known for its hair-strengthening properties. Biotin helps to improve the health of the hair follicles, which in turn promotes faster and healthier hair growth.

Another important ingredient in Beard Mens Facial Hair Growth & Conditioning Gel is Minoxidil 5% and saw palmetto extract. Saw palmetto has been used for centuries to support healthy hair growth. It works by blocking the conversion of testosterone into dihydrotestosterone (DHT), a hormone that is known to contribute to hair loss. By reducing the levels of DHT in the body, saw palmetto helps to prevent hair loss and promote the growth of thicker, fuller facial hair.

To further enhance the effectiveness of Beard Mens Facial Hair Growth & Conditioning Gel, it also contains argan oil. Argan oil is rich in essential fatty acids and antioxidants, which nourish and moisturize the hair follicles. This helps to improve the overall health of the beard, making it softer, shinier, and more manageable. Additionally, argan oil helps to prevent breakage and split ends, allowing your beard to grow longer and stronger.

The key ingredients of Beard Mens Facial Hair Growth & Conditioning Gel

Beard Mens Facial Hair Growth & Conditioning Gel is packed with a powerful blend of natural ingredients that work together to stimulate facial hair growth and condition the beard. Here are the key ingredients that make this gel so effective:

1. Biotin: Biotin, also known as vitamin B7, is a vital nutrient for hair growth. It strengthens the hair follicles, promotes hair growth, and improves the overall health of the beard.

2. Saw Palmetto Extract: Saw palmetto extract is derived from the berries of the saw palmetto plant. It helps to block the conversion of testosterone into dihydrotestosterone (DHT), a hormone that contributes to hair loss.

3. Argan Oil: Argan oil is rich in essential fatty acids and antioxidants, which nourish and moisturize the hair follicles. It improves the overall health of the beard, making it softer, shinier, and more manageable.

4. Vitamin E: Vitamin E is a powerful antioxidant that helps to protect the hair follicles from damage caused by free radicals. It also promotes blood circulation in the scalp, which is essential for hair growth.

5. Aloe Vera: Aloe vera has soothing and moisturizing properties that help to nourish the hair follicles and promote healthy hair growth. It also reduces itching and irritation, which are common problems faced by men growing a beard.

The benefits of using Beard Mens Facial Hair Growth & Conditioning Gel

Using Beard Mens Facial Hair Growth & Conditioning Gel offers a wide range of benefits for men looking to grow a luscious beard. Here are some of the key benefits you can expect from this amazing product:

1. Faster Facial Hair Growth: The unique blend of ingredients in Beard Mens Facial Hair Growth & Conditioning Gel stimulates the hair follicles, promoting faster facial hair growth. You can expect to see significant improvements in the thickness and density of your beard within a few weeks of regular use.

2. Thicker and Fuller Beard: The nourishing properties of Beard Mens Facial Hair Growth & Conditioning Gel help to improve the overall health of the beard, making it thicker and fuller. It strengthens the hair follicles, preventing breakage and promoting the growth of stronger, healthier facial hair.

3. Soft and Manageable Beard: Beard Mens Facial Hair Growth & Conditioning Gel contains argan oil, which moisturizes and conditions the beard, making it soft and manageable. It reduces frizz and tangles, allowing you to style your beard effortlessly.

4. Reduced Hair Loss: The saw palmetto extract in Beard Mens Facial Hair Growth & Conditioning Gel helps to block the conversion of testosterone into DHT, a hormone that contributes to hair loss. By reducing the levels of DHT in the body, this gel helps to prevent hair loss and promote the growth of thicker, healthier facial hair.

Conclusion: Embrace your luscious beard with Beard Mens Facial Hair Growth & Conditioning Gel

Growing a luscious beard has never been easier, thanks to Beard Mens Facial Hair Growth & Conditioning Gel. This revolutionary product is designed to stimulate facial hair growth and condition the beard, giving you the beard of your dreams. With its powerful blend of natural ingredients, Beard Mens Facial Hair Growth & Conditioning Gel promotes faster hair growth, strengthens the hair follicles, and nourishes the beard, making it thicker, fuller, and more manageable. Say goodbye to patchy beards and hello to a luscious beard with Beard Mens Facial Hair Growth & Conditioning Gel.

Women`s Apparel Manufacturing and Retail Store for Sale

U.S.A Laboratory for Minoxidil Hair Loss Product Manufacturing

FDA Registered and GMP Certified Chemists

Raphe Pharmaceutique Laboratories is the No.1 USA minoxidil manufacturer, formulating original minoxidil products, topical Spironolactone products for hair loss treatments, topical solutions of finasteride for severe hair loss treatments, offering private label services on minoxidil foams and gel products.

Raphe Pharmaceutique laboratories manufacture topical, Dutasteride, and the new RU-58841 androgen receptor blocker, a topical ingredient for acne, androgen-mediated hair loss at (5% v/v). The product of choice for acne-prone skin, the most potent inhibitor of the sebaceous gland.

Raphe formulates hair loss treatment blend with natural herbal extracts, Peptide blends with Biotin, Ginseng Panax solutions for hair loss treatment and prevention, spironolactone blend with herbal extracts for ingrown female facial hair. Other contract manufactured and private label product formulations they offer are pain relief comfort gels, anti-bacterial anti-fungal preparations, natural skin bleaching, and depigmenting agents.

Raphe Pharmaceutique laboratory OTC drug products are produced under cGMP manufacturing standards and regulations with professionally trained scientists. FDA registered and state-licensed facility. Whether it`s a small project or a large formulation project, Raphe offers flexible solutions that enable companies to move their brands through each phase with efficiency and speed. Their early development solutions overcome complex formulation challenges such as bioavailability, solubility, and stability processes, navigating complex regulatory environment, build success for brands and enable commercial distribution to store, shorten timelines to getting to the market quicker.

Raphe conducts early stages of ingredients tests to define and establish product requirements and specifications. Conducts verification and validation testing essential to confirm that their products meet those specifications and its intended use for all Minoxidil, Finasteride, spironolactone, and hair loss treatment products, acne treatments and skin bleaching agents they manufacture.

Raphe Pharmaceutique Laboratories provide high-quality drug products to support the pursuit of regulatory approval, offering fit-for-purpose formulations for studies and a comprehensive range of finished forms. Raphe`s robust solutions include Hair loss product manufacturing at all scales, topical solutions with sustained bioavailability, quality design and product development, analytical and stability testing on finished products, Batch Registrations and, documentation for regulatory submissions.

Distributors has access to a range of formulation samples for evaluation purposes prior to final packaging. Each of Raphe`s development and manufacturing staffs are cGMP certified clinical experienced, provides fully integrated and customizable solutions that will drive speed, flexibility, and a streamlined supply chain.  All products they manufacture are evaluated for stability, efficacy, and shelf-life prior to distribution.

For contract manufacturing or private label of any hair loss product visit Healthcareprivatelabel

This is your store’s blog. You can use it to talk about new product launches, experiences, tips or other news you want your customers to read about.

You can check out Shopify’s ecommerce blog for inspiration and advice for your own store and for your store’s blog.

How do I remove this post?
Log in to your store’s admin area then go to the blog section to delete this post.